EdgeX Message Bus action

The action is used for publishing output message into EdgeX message bus.

Please notice that, if you're using the ZeorMQ message bus, the action will create a NEW EdgeX message bus (with the address where running eKuiper service), but not by leveraging the original message bus (normally it's the address & port exposed by application service).

Also, you need to expose the port number to host server before running the eKuiper server if you want to have the service available to other hosts.

Property name	Optional	Description
type	true	The message bus type, three types of message buses are supported, `zero`, `mqtt` and `redis`, and `redis` is the default value.
protocol	true	The protocol. If it's not specified, then use default value `redis`.
host	true	The host of message bus. If not specified, then use default value `localhost`.
port	true	The port of message bus. If not specified, then use default value `6379`.
connectionSelector	true	reuse the connection to EdgeX message bus. more info
topic	true	The topic to be published. The topic is static across all messages. To use dynamic topic, leave this empty and specify the topicPrefix property. Only one of the topic and topicPrefix properties can be specified. If both are not specified, then use default topic value `application`.
topicPrefix	true	The prefix of a dynamic topic to be published. The topic will become a concatenation of `$topicPrefix/$profileName/$deviceName/$sourceName`.
contentType	true	The content type of message to be published. If not specified, then use the default value `application/json`.
messageType	true	The EdgeX message model type. To publish the message as an event like EdgeX application service, use `event`. Otherwise, to publish the message as an event request like EdgeX device service or core data service, use `request`. If not specified, then use the default value `event`.
metadata	true	The property is a field name that allows user to specify a field name of SQL select clause, the field name should use `meta(*) AS xxx` to select all of EdgeX metadata from message.
profileName	true	Allows user to specify the profile name in the event structure that are sent from eKuiper. The profileName in the meta take precedence if specified.
deviceName	true	Allows user to specify the device name in the event structure that are sent from eKuiper. The deviceName in the meta take precedence if specified.
sourceName	true	Allows user to specify the source name in the event structure that are sent from eKuiper. The sourceName in the meta take precedence if specified.
optional	true	If `mqtt` message bus type is specified, then some optional values can be specified. Please refer to below for supported optional supported configurations.

Below optional configurations are supported, please check MQTT specification for the detailed information.

optional
- ClientId
- Username
- Password
- Qos
- KeepAlive
- Retained
- ConnectionPayload
- CertFile
- KeyFile
- CertPEMBlock
- KeyPEMBlock
- SkipCertVerify

::: v-pre Notice that, the edgex action can support data templates to vary the result format, but the result of the data template must be in the object form of a JSON string, e.g. "{\"key\":\"{{.key}}\"}". JSON strings in the form of arrays or non-JSON strings are not supported. :::

Other common sink properties are supported. Please refer to the sink common properties for more information.

Send to various targets

By setting the combination of the properties, we can send the result to various EdgeX message bus settings.

Publish to redis message bus like application service

With the default setting, the EdgeX sink will publish to the default redis message bus as application events. In EdgeX, those messages can be consumed like events emitted by application service.

{
  "id": "ruleRedisEvent",
  "sql": "SELECT temperature * 3 AS t1, humidity FROM events",
  "actions": [
    {
      "edgex": {
        "protocol": "redis",
        "host": "localhost",
        "port": 6379,
        "topic": "application",
        "profileName": "ekuiperProfile",
        "deviceName": "ekuiper",      
        "contentType": "application/json"
      }
    }
  ]
}

Publish to redis message bus like device service

By changing the topicPrefix and messageType properties, we can let EdgeX sink simulates a device. The topic name for device in EdgeX is like edgex/events/device/$profileName/$deviceName/$sourceName so we set the topicPrefix to edgex/events/device to make sure the messages are routing to device events. And by specifying the metadata property, we can have a dynamic topic to simulate multiple devices. Check the next section dynamic metadata for details.

{
  "id": "ruleRedisDevice",
  "sql": "SELECT temperature * 3 AS t1, humidity FROM events",
  "actions": [
    {
      "edgex": {
        "protocol": "redis",
        "host": "localhost",
        "port": 6379,
        "topicPrefix": "edgex/events/device",
        "messageType": "request",
        "metadata": "metafield_name",
        "contentType": "application/json"
      }
    }
  ]
}

Publish to MQTT message bus

Below is a rule that send analysis result to MQTT message bus, please notice how to specify ClientId in optional configuration.

{
  "id": "ruleMqtt",
  "sql": "SELECT meta(*) AS edgex_meta, temperature, humidity, humidity*2 as h1 FROM demo WHERE temperature = 20",
  "actions": [
    {
      "edgex": {
        "protocol": "tcp",
        "host": "127.0.0.1",
        "port": 1883,
        "topic": "result",
        "type": "mqtt",
        "metadata": "edgex_meta",
        "contentType": "application/json",
        "optional": {
          "ClientId": "edgex_message_bus_001"
        }
      }
    }
  ]
}

Publish to zeromq message bus

Below is a rule that send analysis result to zeromq message bus.

{
  "id": "ruleZmq",
  "sql": "SELECT meta(*) AS edgex_meta, temperature, humidity, humidity*2 as h1 FROM demo WHERE temperature = 20",
  "actions": [
    {
      "edgex": {
        "protocol": "tcp",
        "host": "*",
        "port": 5571,
        "topic": "application",
        "profileName": "myprofile",
        "deviceName": "mydevice",      
        "contentType": "application/json"
      }
    }
  ]
}

Connection reuse publish example

Below is an example for how to use connection reuse feature. We just need remove the connection related parameters and use the connectionSelector to specify the connection to reuse. more info

{
  "id": "ruleRedisDevice",
  "sql": "SELECT temperature, humidity, humidity*2 as h1 FROM demo WHERE temperature = 20",
  "actions": [
    {
      "edgex": {
        "connectionSelector": "edgex.redisMsgBus",
        "topic": "application",
        "profileName": "myprofile",
        "deviceName": "mydevice",      
        "contentType": "application/json"
      }
    }
  ]
}

Dynamic metadata

Publish result to a new EdgeX message bus without keeping original metadata

In this case, the original metadata value (such as id, profileName, deviceName, sourceName, origin, tags in Events structure, and id, profileName, deviceName, origin, valueType in Reading structure will not be kept). eKuiper acts as another EdgeX micro service here, and it has own device name and profile name. deviceName and profileName properties are provided, and allows user to specify the device name of eKuiper. The SourceName will be default to the topic property. Below is one example,

Data received from EdgeX message bus events topic,

   {
     "DeviceName": "demo", "Origin": 000, …
     "readings":
     [
        {"ResourceName": "Temperature", value: "30", "Origin":123 …},
        {"ResourceName": "Humidity", value: "20", "Origin":456 …}
     ]
   }

Use following rule, and specify deviceName with kuiper and profileName with kuiperProfile in edgex action.

   {
     "id": "rule1",
     "sql": "SELECT temperature * 3 AS t1, humidity FROM events",
     "actions": [
       {
         "edgex": {
           "topic": "application",
           "deviceName": "kuiper",
           "profileName": "kuiperProfile",
           "contentType": "application/json"
         }
       }
     ]
   }

The data sent to EdgeX message bus.

   {
     "DeviceName": "kuiper", "ProfileName": "kuiperProfile",  "Origin": 0, …
     "readings":
     [
        {"ResourceName": "t1", value: "90", "Origin": 0 …},
        {"ResourceName": "humidity", value: "20" , "Origin": 0 …}
     ]
   }

Please notice that,

The device name of Event structure is changed to kuiper and the profile name is changed to kuiperProfile.
All metadata for Events and Readings structure will be updated with new value. Origin field is updated to another value generated by eKuiper (here is 0`).

Publish result to a new EdgeX message bus keeping original metadata

But for some scenarios, you may want to keep some of original metadata. Such as keep the device name as original value that published to eKuiper (demo in the sample), and also other metadata of readings arrays. In such case, eKuiper is acting as a filter - to filter NOT concerned messages, but still keep original data.

Below is an example,

Data received from EdgeX message bus events topic,

   {
     "DeviceName": "demo", "Origin": 000, …
     "readings":
     [
        {"ResourceName": "Temperature", value: "30", "Origin":123 …},
        {"ResourceName": "Humidity", value: "20", "Origin":456 …}
     ]
   }

Use following rule, and specify metadata with edgex_meta in edgex action.

   {
     "id": "rule1",
     "sql": "SELECT meta(*) AS edgex_meta, temperature * 3 AS t1, humidity FROM events WHERE temperature > 30",
     "actions": [
       {
         "edgex": {
           "topic": "application",
           "metadata": "edgex_meta",
           "contentType": "application/json"
         }
       }
     ]
   }